| Audio Features |
| Frequency Response |
2 Hz - 80 kHz, –3 dB |
| Signal-to-Noise Ratio (S/N) |
118 db (JEITA) |
| Dynamic Range |
112 db (JEITA) |
| Total Harmonic Distortion |
0.001% (JEITA) |
| Valid Sampling Frequency (kHz) |
32, 44.1, 88.2, 176.4, 48, 96, 192, 48P(=46.08),
96P(=92.16), 192P(=184.32) DSD (IEEE1394 or ES-LINK only) |
| Word Clock Frequency (input/output) |
| Normal Mode |
44.1, 88.2, 176.4, 48, 96, 192, 100 (kHz) |
| 4% Down Mode |
48P(=46.08), 96P(=92.16), 192P(=184.32), 100P(=96)
(kHz) |
| Input Frequency Range |
WORD IN mode: ±15
ppm
Rb IN mode is designed for extremely
precise external clocks like a rubidium clock generator |
| Sampling frequencies corresponding to de-emphasis |
32, 44.1, 48, 96 (kHz) |
| Input Terminals |
| Digital |
XLR x2, 5.0Vp-p±0.1V/110Ω
RCA x1, 0.5Vp-p±0.1V/75Ω |
| IEEE 1394 |
IEEE 1394 x2 |
| WORD SYNC |
BNC x1, TTL level/75Ω |
| Output Terminals |
| Analog |
RCA x1, 2.2Vrms±0.1V/10kΩ
XLR
x1, 2.2Vrms±0.1V/10kΩ |
| WORD SYNC |
BNC x1, TTL level/75Ω |
| General |
| Power Supply |
AC 230V, 50Hz |
| Power Consumption |
23 W |
| Weight |
21 kg (46 1/4 lbs) |
| External Dimensions (WxHxD) |
445 x 108 x 420 mm |
| Accessories |
Power cord x 1
Felt pads x 4
Warranty card
x 1
Owner’s manual x 1 |
| • Design
and specifications are subject to change without notice.
• Weight
and dimensions are approximate.
• Illustrations may differ slightly
from production models.
|
The advantage of developing a D/A converter
as a monaural unit is to avoid channel cross-talk. A monaural unit
also allows proper power distribution for each individual analog audio
circuit. In addition, separate D/A converters eliminate the differences
in sound between the left and right channels because each separate
unit has the exact same parts and PCB layout pattern. 